Filtros

Filtro de sucção SFAR Elemento direção do fluxo de dentro para fora até 150 l/min

TECHNICAL SPECIFICATIONS

Construction

The filter housings are designed in accordance with international regulations. They consist of a cover plate, filter head and housing tube. The element is top-removable. These filters can be installed horizontally below the oil level. Standard equipment:

  • mounting holes on the filter head
  • magnetic core built into cover plate
  • foot valve
  • connection for a clogging indicator in filter head

FILTER ELEMENTS

HYDAC filter elements are validated and their quality is constantly monitored according to the following standards:

  • ISO 2941
  • ISO 2942
  • ISO 2943
  • ISO 3724
  • ISO 3968
  • ISO 11170
  • ISO 16889

FILTER SPECIFICATIONS

Temperature range -30 °C to +100 °C

Material of housing tube PA6 – GF30

Material of filter head Die-casting EN AC 43300 – F

Material of cover plate PA6 – GF30

Type of clogging indicator VMFR – Connection thread G 1/8

Pressure setting of the clogging indicator -0.25 bar (others on request)

 

SEALS

  • NBR (= Perbunan)

Installation

  • Tank-top filter

SPECIAL MODELS AND ACCESSORIES

  • without port, no clogging indicator
  • without magnetic core

SPARE PARTS

  • See Original Spare Parts List

CERTIFICATES AND APPROVALS

  • Test certificate 2.2
  • Other approvals on request

COMPATIBILITY WITH HYDRAULIC FLUIDS ISO 2943

  • Hydraulic oils H to HLPD DIN 51524
  • Lubrication oils DIN 51517, API, ACEA, DIN 51515, ISO 6743
  • Compressor oils DIN 51506
  • Biodegradable operating fluids VDMA 24568 HETG, HEES, HEPG

IMPORTANT INFORMATION

  • Filter housings must be earthed.
  • When using electrical clogging indicators, the electrical power supply to the system must be switched off before removing the clogging indicator connector

 

 

Dúvidas?