Filtros

Filtro de pressão para SSDF reversível no fluxo de óleo SSDFF até 15 l / min, até 700 bar

TECHNICAL SPECIFICATIONS

FILTER HOUSING

Construction

The filter housings are designed in accordance with international regulations. They consist of a filter head and a screw-in filter bowl. SSDFF filters are suitable for flow in both directions.

Standard equipment:

  • without bypass valve
  • connection for a clogging indicator

FILTER ELEMENTS

HYDAC filter elements are validated and their quality is constantly monitored according to the following standards:

  • ISO 2941
  • ISO 2942
  • ISO 2943
  • ISO 3724
  • ISO 3968
  • ISO 11170
  • ISO 16889

FILTER SPECIFICATIONS

Nominal pressure 700 bar

Temperature range -10 °C to +100 °C

Material of housing and cover plate Stainless steel 1.4462

Type of clogging indicator

VD (differential pressure indication up to 420 bar operating pressure) with ATEX directive

Indication for higher differential pressures on request

Pressure setting of clogging indicator

  • SSDF: 5 bar
  • SSDFF: 8 bar
  • (others on request)

Bypass cracking pressure (optional) 6 bar (others on request)

SEALS

  • FPM (Viton)

INSTALLATION

  • Inline filter

SPECIAL MODELS AND ACCESSORIES

  • Seals in NBR, EPDM
  • With bypass valve
  • Without port for clogging indicator

SPARE PARTS

  • See Original Spare Parts List

CERTIFICATES AND APPROVALS

  • On request

COMPATIBILITY WITH HYDRAULIC FLUIDS ISO 2943

  • Hydraulic oils H to HLPD DIN 51524
  • Lubrication oils DIN 51517, API, ACEA, DIN 51515, ISO 6743
  • Compressor oils DIN 51506
  • Biodegradable operating fluids VDMA 24568 HETG, HEES, HEPG
  • Fire-resistant fluids HFA, HFB, HFC and HFD
  • Operating fluids with high water content (> 50 % water content) on request

IMPORTANT INFORMATION

  • Filter housings must be earthed.
  • When using electrical clogging indicators, the electrical power supply to the system must be switched off before removing the clogging indicator connector.

 

Dúvidas?