Filtros

Filtro de linha MFX até 130 l/min, até 50 bar

TECHNICAL SPECIFICATIONS

FILTER HOUSING

Construction

The filter housings are designed in accordance with international regulations. They consist of a filter head and a screw-in filter bowl. Standard equipment:

  • usually 4 possible positions for a clogging indicator
  • with bypass valve

 

FILTER ELEMENTS

HYDAC filter elements are validated and their quality is constantly monitored according to the following standards:

  • ISO 2941
  • ISO 2942
  • ISO 2943
  • ISO 3724
  • ISO 3968
  • ISO 16889

Filter elements are available with the following pressure stability values:

  • Betamicron® (BN4HC): 10 bar
  • ECOmicron® (ECON2): 10 bar
  • Mobilemicron (MM): 10 bar

 

FILTER SPECIFICATIONS

Nominal pressure 50 bar

Fatigue strength (without BF clogging indicator) At nominal pressure 106 cycles from 0 to nominal pressure

Temperature range -30 °C to +100 °C (-10 °C to +80 °C by BF clogging indicator)

Material of filter head Aluminium

Material of filter bowl Aluminium

Type of clogging indicator

  • VM (Diff. pressure indicator up to 210 bar operating pressure)
  • VL (Diff. pressure indicator up to 50 bar operating pressure)

Setting pressure of the clogging indicator Standard 2.5 bar, optional 1 bar (others on request)

Bypass cracking pressure Standard 3.5 bar, optional 1.7 bar (others on request)

 

SEALS

  • NBR (= Perbunan)

Installation

  • As inline filter

SPECIAL MODELS AND ACCESSORIES

  • Seals in FPM, EPDM (on request)

SPARE PARTS

  • See Original Spare Parts List

CERTIFICATES AND APPROVALS

  • On request

COMPATIBILITY WITH HYDRAULIC FLUIDS ISO 2943

  • Hydraulic oils H to HLPD DIN 51524
  • Lubrication oils DIN 51517, API, ACEA, DIN 51515, ISO 6743
  • Compressor oils DIN 51506
  • Biodegradable operating fluids VDMA 24568 HETG, HEES, HEPG
  • Fire-resistant fluids HFC and HFD
  • Operating fluids with high water content (>50% water content) on request

MAINTENANCE INSTRUCTIONS

  • Filter housings must be earthed.
  • When using electrical clogging indicators, the electrical power supply to the system must be switched off before removing the clogging indicator connector.


Dúvidas?