Filtros

Filtro de linha ILF até 120 l/min, até 350 bar

TECHNICAL SPECIFICATIONS

FILTER HOUSING

Construction The filter housings are designed in accordance with international regulations. They consist of a filter housing and a screw-in cover plate. Standard equipment:

  • without bypass valve (only ILF 1, ILF 3 and ILF 4)
  • with bypass valve (only ILF 2 and ILF 3)

 

FILTER ELEMENTS HYDAC

Filter elements are validated and their quality is constantly monitored according to the following standards:

  • ISO 2941
  • ISO 2942
  • ISO 2943
  • ISO 3724
  • ISO 3968
  • ISO 16889

Filter elements are available with the following pressure stability values:

  • Betamicron® (BN4HC): 20 bar
  • Betamicron® (BH4HC): 210 bar
  • Wire mesh (W): up to 100 bar

 

FILTER SPECIFICATIONS

Nominal pressure ILF 1, 2, 3: 350 bar The permitted operating pressure will be reduced according to the max. permitted value of the threaded connection used! ILF 4: 160 bar

Fatigue strength At nominal pressure 106 cycles from 0 to nominal pressure

Temperature range -10 °C to +100 °C

Material of filter housing and cover plate ILF 1, 2, 3: Steel 52-3 ILF 4: Aluminium

Cracking pressure of bypass

  • ILF 2: 5.5 bar optional: ILF 3: 3 or 6 bar

 

SEALS

  • Perbunan (= NBR)

Installation

  • As inline filter

SPECIAL MODELS AND ACCESSORIES

  • bypass valve for ILF 3
  • others on request  see original spare parts list

SPARE PARTS

  • See Original Spare Parts List

CERTIFICATES AND APPROVALS

  • On request

COMPATIBILITY WITH HYDRAULIC FLUIDS ISO 2943

  • Hydraulic oils H to HLPD DIN 51524
  • Lubrication oils DIN 51517, API, ACEA, DIN 51515, ISO 6743
  • Compressor oils DIN 51506
  • Biodegradable operating fluids VDMA 24568 HETG, HEES, HEPG
  • Operating fluids with high water content (>50% water content) on request

 MAINTENANCE INSTRUCTIONS

  • Filter housings must be earthed

 

Dúvidas?